| S.I.NO | Certification body | scope | Certificate Registration No. | Description | Norms | Product Family | Download |
|---|---|---|---|---|---|---|---|
| 1 | DNV | Manufacture and Warehousing of Hose Assemblies | C601999 | Quality Management System | AS9100D and ISO 9001:2015 | NA |  |
| S.I.NO | Certification body | Scope | Certificate No. | Description | Norms | Product family | Download |
|---|---|---|---|---|---|---|---|
| 1 | TUV SUD | "Design, Manufacture of Braided and Spiral Rubber Hoses for Automotive Application " | 0440036 | Quality Management System | IATF 16949 2016 | NA | |
| 2 | TUV SUD | "Design, Manufacture and Sales of Braided and spiral Rubber Hoses, Industrial rubber hoses, composite hoses and hose assemblies. " | 9910022108 | Quality Management System | ISO 9001 2015 | NA | |
| 3 | Department of Scientific and Industrial Research | Recognition of In-house R&D Unit | TU/IV-RD/4679/2020 | Our R&D centre is recognised by Department of Scientific and Industrial Research(DSIR) for research and new development activities | NA | NA | |
| 4 | DNV | Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings | TAP00000SB Rev2 | Wire Braided Hoses | SAE J 517 / EN 853 / EN857 / Proprietary | PH253, PH254, PH257, PH258, PH293, PH296, PH297 | |
| 5 | DNV | Flexible Hoses of Non-Metallic Material without Permanently Fitted Couplings | TAP00002CU | Aviation Fuel hose | EI 1529 / ISO 1825 | PH690 | |
| 6 | DNV | Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings | TAP00000SC Rev2 | Wire Spiral Hoses | SAE J 517 / EN 856 | PH277, PH278, PH177, PH178, PH279 | |
| 7 | DNV | Materials other than steel for pipes conveying oil or fuel oil: flexible pipe assemblies and compensators | MEDB00000Y5 - Rev1 | Braided / Spiral Hoses | SAE J 517 / EN 853 / EN856 / EN857 / Proprietary | PH-253, PH-254,PH-257, PH-258,PH-293,PH-296,PH-297,PH-177,PH-277, PH-278, PH-178, PH-279 | |
| 8 | DNV | Quality system for the products | MEDD00000VE - Rev1 | Braided / Spiral Hoses | SAE J 517 / EN 853 / EN856 / EN857 / Proprietary | PH-253, PH-254, PH-257 , PH-258, PH-293,PH-296 , PH-297 , PH-177, PH-277, PH-278,PH-178, PH-279 | |
| 9 | DNV-ATEX | Wire Reinforced Fuel Dispensing Rubber hose for Fuel Dispensing pumps with type designation Polyhose, Exitflex 3/4" and 1" | 53559-2020-PA-IND | Wire Reinforced Fuel Dispensing Hose for Fuel Dispensing Pumps. | TYPE - 3 EN 1360 | PH-442 | |
| 10 | DOT | To Meet the test requirements as per the Standard | - | Air Brake hose | SAEJ1402-TYPE A | PH-540 | |
| 11 | MSHA Approval | Evaluation of the hydraulic hose cover, compound code CHP101 | MSHA IC-256/2 | Low pressure hose | SAE J517 100R6 | PH-907,PH-957 | |
| 12 | MSHA Approval | Evaluation of the hydraulic hose cover, compound code CHP107 | MSHA IC-256/4 | Medium pressure hose | SAE J517 100R1 | PH-260,PH-207,PH-294,PH-941 | |
| 13 | MSHA Approval | Evaluation of the hydraulic hose cover, compound code M60EB | MSHA IC-256/6 | Suction and Low Pressure Hose | SAE J517 100R4 | PH-245,PH-904 | |
| 14 | MSHA Approval | Evaluation of the hydraulic hose cover, compound code CHP104 | MSHA IC-256/8 | 1 and 2 Braided Hydraulic Hose | SAE J 517 / EN 853 / EN857 | PH-257(TOKAI),PH-253(TOKAI),PH-254(TOKAI),PH-915 | |
| 15 | MSHA Approval | Evaluation of the hydraulic hose cover, compound code CHP603 | MSHA IC-256/09 | 1 and 2 Braided Hydraulic Hose | SAE J 517 / EN 853 / EN857 / Proprietary | PH-253,PH-254,PH-257,PH-258,PH-293,PH-521,PH-522,PH-146,PH-141,PH-142,PH-150, PH-161,PH-162,PH-163,PH-147,PH-174,PH-175,PH-176, PH-243,PH-296,PH-297,PH-440,PH-442,PH-513,PH-514, PH-515,PH-516,PH-534,PH-535,PH-570,PH-610, PH-911,PH-913,PH-926,PH-956,PH-990 | |
| 16 | MSHA Approval | Evaluation of the hydraulic hose cover, compound code CHP614 | MSHA IC-256/10 | High Temperature hose | J517 100R2 Type AT | PH-256,PH-255,PH-258Hine,PH-227,PH-257Hine,PH291,PH-292 | |
| 17 | MSHA Approval | Evaluation of the hydraulic hose cover, compound code CHP622 | MSHA IC-256/13 | Wire Reinforced Fuel Dispensing Hose for Fuel Dispensing Pumps. | TYPE - 3 EN 1360 / TYPE-D EN1762 | PH-442,PH-534,PH-174 | |
| 18 | iCAT (International Centre for Automotive Technology) | To Meet the test requirements as per the Standard | CD0CM0431 | Air Brake hose | SAE J 1402 TYPE A | PH-540 | |
| 19 | iCAT (International Centre for Automotive Technology) | To Meet the test requirements as per the Standard | CD0CM1057 | Air Brake hose | SAE J 1402 TYPE A | PH-540 | |
| 20 | iCAT (International Centre for Automotive Technology) | Extension of validity of the earlier test report no. CT0CF0767 dated 27.04.2010 of 1/4" CNG Low Pressure Flexible Hose from standard AIS028 and SAE J30 R6 IS 15722:2006 to with a different internal and outer diameter | CT1CK1218 | CNG Low Pressure flexible hose | SAE J30 R6 | PH-536 | |
| 21 | iCAT (International Centre for Automotive Technology) | Extension of validity of the earlier test report no. CT0CK1825 dated 24.06.2015 of 1/2" CNG Low Pressure Flexible Hose from standard SAE J30 R6 and AIS 028 to IS 15722:2006 to with a different internal and outer diameter | CT1CK1974 | CNG Low Pressure flexible hose | SAE J30 R6 | PH-536 | |
| 22 | iCAT (International Centre for Automotive Technology) | Extension of validity of the earlier test report no. CT0CF0766 dated 27.04.2010 of 3/8" CNG Low Pressure Flexible Hose from standard SAE J30 R6 and AIS 028 to IS 15722:2006 to with a different internal and outer diameter | CT1CK1217 | CNG Low Pressure flexible hose | SAE J30 R6 | PH-536 | |
| 23 | iCAT (International Centre for Automotive Technology) | Extension of validity of the earlier test report no. CT0CF0767 dated 27.04.2010 of 1/4" CNG Low Pressure Flexible Hose from standard SAE J30 R6 and AIS 028 to IS 15722:2006 to with a different internal and outer diameter | CT1CK1218 | CNG Low Pressure flexible hose | SAE J30 R6 | PH-536 | |
| 24 | iCAT (International Centre for Automotive Technology) | Extension of validity of the earlier test report no. CT1CK1217 dated 29.04.2015 of 3/16" CNG Low Pressure Flexible Hose from standard IS 15722:2006 to with a different internal and outer diameter | CT2BL5008 | CNG Low Pressure flexible hose | SAE J30 R6 | PH-536 | |
| 25 | iCAT (International Centre for Automotive Technology) | Extension of validity of the earlier test report no. CT0CF0766 dated 27.04.2010 of 5/16" CNG Low Pressure Flexible Hose from standard SAE J30 R6 and AIS 028 to IS 15722:2006 to with a different internal and outer diameter | CT2LL0047 | CNG Low Pressure flexible hose | SAE J30 R6 | PH-536 | |
| 26 | iCAT (International Centre for Automotive Technology) | To evaluate performance of LPG hose assembly as the requirements given in IS 9573:2012 amended up to date | CT0BL5055 | LPG Hose | IS 9573:2012 Type-1 | PH-535 | |
| 27 | iCAT (International Centre for Automotive Technology) | To evaluate performance of LPG hose assembly as the requirements given in IS 9573:2012 amended up to date | CT0BL5054 | LPG Hose | IS 9573:2012 Type-1 | PH-535 | |
| 28 | iCAT (International Centre for Automotive Technology) | To evaluate performance of LPG hose assembly as the requirements given in IS 9573:1998 amended up to date | CT0CE1398 | LPG Hose | IS 9573:1998 | PH-535 | |
| S.I.NO | Certification body | Scope | Certificate Registration No. | Description | Norms | Product family | Download |
||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | TUV SUD | Design, Manufacture, Assembly and Sales of Spiral and Cross braided high pressure thermoplastic hose, PTFE hose, Industrial hose and PVC braided hose | 9910020952 | Quality Management System | ISO 9001:2015 | NA | |
||||||||||||||||||||||||||||||||||||||||||
| 2 | TUV SUD | Manufacture and Assembly of thermoplastic hoses and PTFE hoses for Automotive application | 0535654 | Quality Management System | IATF 16949:2016 | NA | |
||||||||||||||||||||||||||||||||||||||||||
| 3 | TUV SUD | Design, Manufacture, Assembly, Supply of Thermoplastic tube, spiral and cross braided high pressure Thermoplastic Hose, PTFE hose, PVC braided hose for Industrial and Automotive application | 99 104 00186 | Environmental management system | ISO 14001:2015 | NA | |
||||||||||||||||||||||||||||||||||||||||||
| 4 | TUV SUD | Manufacturer and supply of Thermoplastic Tubes for Medical application | 99 400 00020 | Quality Management System | ISO 13485:2016 | NA | |
||||||||||||||||||||||||||||||||||||||||||
| 5 | UL LLC | Certificate of Compliance - AIRLESS PAINT SPRAY HOSE ASSEMBLIES | MH45108-20060817 | TYPE APPROVAL | "UL 1450, Motor-Operated Air Compressors, Vacuum Pumps, And Painting Equipment" | "Model 1P04PS Nominal Size: 1. 1/4 in. - with Conductive Layer - 0.520 in. OD,0.255 in. ID 2. 1/4 in. - with Conductive Strip – 0.475 in. OD, 0.255 in. ID 3. 5.5 mm - with Conductive Strip - 0.425 in. OD and 0.217 in. ID 4.Model PH344-04, 1/4 in. - with conductive Stripe - 0.475 in. OD, 0.255 in. ID 5. Model no PH737-05, 8.0 mm - with Conductive Stripe - (13.2mm OD and 8 mm ID)" | |
||||||||||||||||||||||||||||||||||||||||||
| 6 | DNV-GL | High-pressure hoses with permanently fitted couplings to be used in the gas inflation systems for inflatable life-saving appliances. | TAP0000172 | TYPE APPROVAL | ISO 15738:2002 | PH194-05: High Pressure Hose PH194-010: Hose assembly | |
||||||||||||||||||||||||||||||||||||||||||
| 7 | DNV-GL | Manufacture and testing of Thermoplastic/PTFE Hoses (Type: PH/EF 148, PH/EF 149 & PH/EF 179 series) | 3587-2013-CE-IND-DNV | TYPE APPROVAL | SAE 100 R7 & R8/ DIN EN ISO 3949 ,SAE J517/ 100 R14 |
| |
||||||||||||||||||||||||||||||||||||||||||
| 8 | "MSHA U.S. DEPARTMENT OF LABOUR " | Hydraulic hose cover (Compound 1190A10FHF) | IC-256/12 | TYPE APPROVAL | Marine Steering hose & Marine Fast Response Hose | "PH393 - Marine Steering hose PH394 - Marine Fast Response Hose" | |
||||||||||||||||||||||||||||||||||||||||||
| 9 | "NHTSA DOT APPROVAL U.S. DEPARTMENT OF TRANSPORTATION " | Brake Hoses | "LETTER DATED : JUNE 8, 2012 SYMBOL : ""POLYHOSE""" | Federal Motor Vehicle Safety Standard - FMVSS 106 | POLYAMIDE TUBE 6 mm, 8mm, 12 mm | |
|||||||||||||||||||||||||||||||||||||||||||
| 10 | LAPI LABORATORIO PREVENZIONE INCENDI S.P.A | Ship & Marine Technology - Fire Resistance Of Hose Assemblies | 0987/MED-B/643 | EC-Type Examination | ISO 15540 : 1999/COR 1:1999, UNI EN ISO 15540 : 2003 | PH779-06 : Flexible Pipe Assemblies | |
||||||||||||||||||||||||||||||||||||||||||
| 11 | ARAI (The Automotive Research Association of India) | To Meet the test requirements as per the Standard | AN2621 | Hydraulic Brake Hose – Type Approval. | SAE J1401 / IS 7079:2008 | PH - 777 | |
||||||||||||||||||||||||||||||||||||||||||
| S.I.NO | Certification body | Scope | Certificate Registration No. | Description | Norms | Product Family | Download |
|---|---|---|---|---|---|---|---|
| 1 | TUV SUD | Manufacture of thermoplastic, Rubber and PTFE Hose Assemblies | 0456074 | Quality Management System | IATF 16949:2016 | NA | |
| 2 | TUV SUD | Manufacture of Thermoplastic, Rubber and PTFE hose assemblies | 99 100 21151 | Quality Management System | ISO 9001:2015 | NA | |
| 3 | TUV SUD | Manufacture of Thermoplastic, Rubber and PTFE hose assemblies | 99 104 01294 | Environmental Management System | ISO 14001:2015 | NA | |
| 4 | DNV | Rubber Hose and Hose assemblies with and without internal vapour recovery for fuel dispensing systems | C521221 Rev. 0 | TYPE APPROVAL | NA | Rubber Hose and hose assemblies with and without internal vapour recovery for fuel dispensing systems -EN 13483:2013 & EN 1360:2013 | |
| 5 | ARAI (The Automotive Research Association of India) | To Meet the test requirements as per the Standard | AN2621 | Hydraulic Brake Hose – Type Approval. | SAE J1401 / IS 7079:2008 | PH - 777 | |
| S.I.NO | Certification body | Scope | Certificate Registration No. | Description | Norms | Product Family | Download |
|---|---|---|---|---|---|---|---|
| 1 | TUV SUD | Manufacture of thermoplastic, Rubber and PTFE hoses assemblies for Automotive application | 0500510 | Quality Management System | IATF 16949:2016 | NA | |
| S.I.NO | Certification body | Scope | Certificate Registration No. | Description | Norms | Product family | Download |
|---|---|---|---|---|---|---|---|
| Polyhose India Pvt Ltd(Aerospace Division) | |||||||
| 1 | TUV SUD | Design,Manufacture and Supply of PTFE hose and Hose Assemblies for Aerospace Application | 951187402 | Quality Management System | AS9100D & ISO 9001:2015 | NA | |
| 2 | NADCAP | Fluid Distribution Systems AC7112 Rev C - Nadcap Fluids Systems Manufacturers Audit Criteria AC7112/1 Rev A - Nadcap Hose Manufacturing Audit Criteria AC7112/2 Rev B - Nadcap Audit Criteria for Fittings and Other Machined Components AC7112/4 Rev B - Nadcap Hose Assembly Audit Criteria | 17499223633 | PRI - QML (Qualified Manufacturer List) - Fluid Distribution System | AC7112 Rev C AC7112/1 Rev A AC7112/2 Rev B AC7112/4 Rev B | - PTFE Extruded Inner Tube -Reinforced(Pressure Containment Hose) - AS4370 - General Fittings and other machined components - AS1339 PTFE CRES Braided Hose Assembly - AS1946 PTFE CRES Braided Hose Assembly | |
| 3 | DGAQA (Directorate General of Aeronautical Quality Assurance) | High Pressure PTFE Hose Assembly as per AS1339, Medium Pressure PTFE Hose Assembly as per AS1946, Aircraft Refuelling hose conforming to EI 1529 Type C/ISO 1825 Type C and Jack Hose Polyhose series PH350, PH351 & PH751 | DGAQA/REGN/85/2021 | Design, Development & Production of Aerospace Product | NA | SAE AS1339 series, SAE AS1946 series, PH660 (Aircraft Refuelling hose), PH350, PH351 & PH751 | |
| Polyhose India Pvt Ltd - Unit IV(Aerospace Division) | |||||||
| 4 | TUV SUD | Manufacture & Supply of Metal End Fittings & Other Machined Components for Aerospace Applications | 951184746 | Quality Management System | AS9100D & ISO 9001:2015 | NA | |
| S.I.NO | Certification body | scope | Certificate Registration No. | Description | Norms | Product Family | Download |
|---|---|---|---|---|---|---|---|
| 1 | TUV SUD | Manufacture of Thermoplastic, Rubber, PTFE Hose and Metal Tube Assemblies | 99 100 20483 | Quality Management System | ISO 9001:2015 | NA | |
| S.I.NO | Certification body | Scope | Certificate No. | Description | Norms | Product family | Download |
|---|---|---|---|---|---|---|---|
| 1 | TUV SUD | Manufacture of SS flexible hose, SS braids and metal hose assemblies | 99 100 18838 | Quality Management System | ISO 9001:2015 | NA | |
| 2 | TUV NORD | Manufacturer of Stainless Steel Flexible corrugated Hose and Hose Assemblies with or without Braid For Pressure Equipment | 07/203/1409/HP/4380/22 | Accordance to the rule of AD 2000-Merkblatt HP0 | DIN EN ISO 10380 : 2013-02 | Size range ¼” to 10” (DN 6 to DN 250) | |
| 3 | TUV NORD | Welding Manufacturer of Stainless steel Flexible Hose and Hose assemblies with or without Braid, Size Range ¼” to 10” ID (DN 6 to DN 250) in accordance with DIN EN ISO 10380,2013-02, PED 2014/68/EU Art. 4 Abs. or Cat 1 | 07/203/1409/HZ/4380/22 | Quality Management system | 2014/68/EU, Annex I, point 3.1 | Size Range ¼” to 10” ID (DN 6 to DN 250) | |
